For screen reader problems with this website, please call414-800-14804 1 4 8 0 0 1 4 8 0Standard carrier rates apply to texts.

Now carrying

BADGE

Monitor Audio IA200-2C Installation Amplifier

Model #: IA2002C
252189
Monitor Audio
At a Glance

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. A ‘Connect’ amplifier, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

Call for Best Price
$99,999.00Save $NaN

Call or Chat Now for

Best Price Options and Stock


Get to know this product.

The IA200-2C Installation Amplifier supplies up to 200 watts per channel at 4 ohms. As a Monitor Audio ‘Connect’ amplifier, it utilises our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

A slim 1U rack height, it universally fits into most racks whilst delivering 93% energy efficiency. The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. A visual match for the rest of the Monitor Audio Installation Amplifier line, the IA200-2C is ready for any project.

  • 200 x2 @ 4Ohms via Hypex Amplifier modules
  • 1U Chasis
  • Full IP Control
  • Fully customizble acousitic settings

Important: Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.

Specifications

General

'Connect' IP ControlYes
Channel Number2 (1 Stereo Pair)
Power (W / Channel) | 4 ohms200 W
Power (W / Channel) | 8 ohms150 W
Power (W / Channel) | Bridge (8 ohms)470 W (1CH)
Input Impedance20 K ohms
Output Impedance (Loop RCA)600 ohms
Input Sensitivity100 mV / 1 W, 1230 mV – Full power
Maximum Input Voltage2.9 V
Signal to Noise (SN:R)-100 dB (20 Hz – 20 kHz)
Frequency Response5 Hz – 50 kHz
Total Harmonic Distortion THD + N@1 KHz0.03%
Rack Height1U
Dimensions (Excluding Feet (H x W x D))42.4 x 438 x 427 mm (1.69 x 17.25 x 16.82")
Dimensions (Including Feet (H x W x D))52.8 x 438 x 427 mm (2.06 x 17.25 x 16.82")
Width (including rack brackets)482 mm (19")
IP CommunicationTCP/IP (RJ-45 10/100 Base T)
Mains Operating Voltage100 – 120 V @ 60 Hz; 220 – 240 V @ 50 Hz
Fuse Type5 A (T5AL ~ 250VAC)
Standby Power Consumption<0.5 W (green mode)
Networked Standby Power Consumption<2 W
Weight5.3 kg (11 lb 10 oz)

Misc. Specs

Depth (in.)16
Height (in.)1.69
Impedance20k ohms
Width (in.)17.25
Manufacturer Warranty5 Year
Product Weight (lbs.)11.88
ColorBlack
WarningProposition 65 Warning for California Residents