For screen reader problems with this website, please call414-800-14804 1 4 8 0 0 1 4 8 0Standard carrier rates apply to texts.

Now carrying

BADGE

Monitor Audio IA150-8C Installation Amplifier

Model #: IA1508C
252157
Monitor Audio
At a Glance

The IA150-8C enables up to eight (4 stereo pairs) channels of 150 watts of power at 4 ohms. It’ll fit 1U rack height and, it employs our Connect IP interface, a web application, which can be accessed by any device connected to the internet with a browser on the same network.

Call for Best Price
$99,999.00Save $NaN

Call or Chat Now for

Best Price Options and Stock


Get to know this product.

The Monitor Audio Installation Amplifiers are configurable to 1, 2, 3, 4, 5, 6, or 12 channels. The IA150-8C enables up to eight (four stereo pairs) channels of 150 watts of power at four ohms. It’ll fit 1U rack height and, as a member of the Monitor Audio ‘Connect’ division, it employs our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

The IP control is via the RJ-45 input, controlling power On/Off, volume, muting, and input source selections. Perfectly prepared for any project, the IA150-8C’s industry standard removable block connectors accept up to 12-gauge (3.5 mm2) cable. Together with the rest of the Installation Amplifier range, the IA150-8C provides the brain as well as the brawn for the mightiest of projects.

  • 150 x8 @ 4Ohms via Hypex Amplifier modules
  • 1U Chasis
  • Full IP Control
  • Fully customizble acousitic settings

Important: Please ensure the firmware is up to date before downloading IR Codes, IP Codes or the Crestron/Control4 drivers, which can be found in the Downloads area.

Specifications

General

'Connect' IP ControlYes
Channel Number8 (4 Stereo Pairs)
Power (W / Channel) | 4 ohms150 W
Power (W / Channel) | 8 ohms140 W
Power (W / Channel) | Bridge (8 ohms)300 W (4CH)
Input Impedance20 K ohms
Output Impedance (Loop RCA)600 ohms
Input Sensitivity100 mV / 1 W, 1140 mV – Full power
Maximum Input Voltage2.9 V
Signal to Noise (SN:R)-100 dB (20 Hz – 20 kHz)
Frequency Response5 Hz – 50 kHz
Total Harmonic Distortion THD + N@1 KHz0.03%
Rack Height1U
Dimensions (Excluding Feet (H x W x D))42.4 x 438 x 427 mm (1.69 x 17.25 x 16.82")
Dimensions (Including Feet (H x W x D))52.8 x 438 x 427 mm (2.06 x 17.25 x 16.82")
Width (including rack brackets)482 mm (19")
IP CommunicationTCP/IP (RJ-45 10/100 Base T)
Mains Operating Voltage100 – 120 V @ 60 Hz; 220 – 240 V @ 50 Hz
Fuse Type10 A (T10AL ~ 250VAC)
Standby Power Consumption<0.5 W (green mode)
Networked Standby Power Consumption<2 W
Weight7.45 kg (16 lb 6 oz)

Misc. Specs

Depth (in.)16
Height (in.)1.69
Impedance20k ohms
Width (in.)17.25
Manufacturer Warranty5 Year
Product Weight16.38
WarningProposition 65 Warning for California Residents