For screen reader problems with this website, please call414-800-14804 1 4 8 0 0 1 4 8 0Standard carrier rates apply to texts.
Call or Chat Now for
Best Price Options and Stock
Our most-versatile wireless Bluetooth speakers. HD3 Wireless Speakers work with all your apps, music, and devices so no matter how you listen, HD3 has you covered. The ultimate mini music system with wireless that works.
The HD3 Wireless Speakers are small desktop speakers with a surprisingly large sound for their size.
No network setup, passwords to enter, or buttons to push. Setting up these speakers is so easy you’ll be rocking in no time. Keep your music fun, easy, and sounding great.
Don’t let their size fool you as this little speaker is packed with much more sound than you would expect.
The HD3 Wireless Speakers are constructed with custom Audioengine components: aramid fiber woofers, silk tweeters, Premium Bluetooth aptX-HD, and built-in power amps wrapped in precision-tuned, hand-crafted cabinets. Clear, full and powerful audio that fills almost any room.
Audioengine wireless speakers are special. Their built-in analog power amplifiers sound incredible compared to lower-cost digital amps found in other mass-produced brands. A whole new audio experience, guaranteed.
Connector Type | Micro-USB |
Enclosure Type | Thick MDF Cabinet |
Tweeter Composition | Silk Dome |
Woofer Composition | Kevlar® Cone |
Volume Control | Yes |
Bluetooth | Yes |
Sold As | Pair |
Color | Satin Black |
Type | 2.0 powered multimedia speaker system |
Amplifier Type | Dual analog class A/B monolithic |
Power Output | 60W peak power total (15W RMS / 30W peak per channel), AES |
Drivers | 2.75″ aramid fiber woofers, 3/4″ silk dome tweeters |
Inputs | 3.5mm stereo mini-jack, stereo RCA, USB, Bluetooth |
Outputs | RCA variable line-out, 3.5mm mini-jack headphone out |
Mains Voltages | 110-240V 50/60Hz auto-switching |
SNR | >95dB (typical A-weighted) |
THD +N | <0.05% at all power settings |
Crosstalk | <50dB |
Frequency Response | 65Hz-22kHz +/-2.0dB |
Freq. Response W/Bass Reduction Switch Selected | 100Hz-22kHz +/-2.0dB (-5dB down) |
Input Impedance | 5K ohms unbalanced |
Protection | Output current limiting, thermal over-temperature, power on/off transient protection |
Headphone Amp Type | OPA2134 |
Full-Scale Headphone Output Level | 2.0V RMS |
Output Impedance | 2 ohms |
Recommended Headphone Impedance Range | 10 ohms to 10K ohms |
Internal D/A Converter | PCM 5102 |
Input Bit Depth | 24-bits, upsampled |
Bluetooth Receiver Type | Bluetooth 5.0 audio |
Supported Codecs | aptX HD, aptX low latency, aptX, AAC, SBC |
Wireless Operation Range | Up to 100ft (30m) typical |
Input Data Rate | Determined by Bluetooth |
Wireless Latency | ~30 milliseconds (ms) |
Connector Type | Micro-USB |
USB Device Class | USB 1.1 or above |
Internal D/A Converter | PCM 5102 |
Input Bit Depth | 24-bits, upsampled |
Input Data Rate | 44.1KHz/48KHz |
Dimensions (each) | 7″(H) x 4.25″ (W) x 5.5″ (D) |
Weight (LEFT speaker) | 1.8Kg/4lbs |
Weight (RIGHT speaker) | 1.5Kg/3.4lbs |
Shipping Weight | 4.5kg/10lbs per pair |
Shipping Box Dimensions | 11.6″ (29.5cm)H x 11.75″ (30cm)L x 8.8″ (22.5cm)W |
Environmental Requirements | Operating temperature: 32 degrees F to 95 degrees F; Non-operating temperature: -4 degrees F to 113 degrees F; Relative humidity: 5% to 95% non-condensing |
Product Weight (lbs.) | 7.4 |
Frequency Response | 65Hz-22kHz +/-2.0dB |
Enclosure Material | Thick MDF Cabinet |
Color Finish Name | Satin Black |
Manufacturer Warranty | 3 Year |
Number of USB Ports | Yes |
RMS Power Handling (Watts) | 15 |
Color | Black |
USB Port | Yes |
Depth (in.) | 5.5 |
Height (in.) | 7 |
Width (in.) | 4.25 |
Woofer Size | 2.75" |